Recent content by Valkman

ok so what I was lookingathttps://www.ebay.com/itm/304065130934 listed for an 82-89, so I'm guessing there different. Also could anyone tell what the 2 rubber bands are for?

That would be nice know, to make sure they match?

Are they the same (or compatible ) to 73+ A-body calipers? They look the same in picture?

:BangHead:

Ok taking pishta's suggestions I did bit of checking. The coil read 1.4 ohms across the post and 9.8k ohms internally. Interesting the coil I changed out (an Accel) had the same readings. With the ignition on I read 12v across the coil and as 12v to the source to the Summit box. This tell...

What does it matter what brand CDI box it is they work the same way, and they are even wired the same, so the diagnostic should be very similar.

When everything running the spark is fine, the car runs like freight train. Which makes me think it's something else. It is possible the box is the problem, but with all of the other variables I'd like to see if there's something else first.

Thank You pishta for giving me some input I can use. Ok I'm sorry for rubbing some of you the wrong way, but if I just go ahead swap out a the ignition system because some doesn't like what I have and I still have the problem, then I've just wasted a lot of time and money. I'd like to make...

Guys the ignition box is fine, there something else going on here. People have been using MSDs for ever, and yes maybe there not as reliable as they once were but for most part they still work. Otherwise they wouldn't sell. How about a little less option and maybe some constructive help please...

I did isolate that wire.

My car wouldn't run right with with chrome box? Believe me I tried. It ran great with MSD that is when it ran. I should add this a built motor, 410 roller cam Eddy ported heads. The box I'm using isn't an actual MSD it's Summits version and I think it's working fine. I think it's something...

Having trouble getting spark out of my ignition. I have an MSD a high voltage coil and a stock electronic distributor. I rewired it the ignition according the MSD instructions, which eliminates the ballast. A first it ran great. I drove it for while then it no spark. I checked the wiring, and...

Need some work on a 904, anyone know someone good in the Triad area (Greensboro NC).

What l listed above only cost around $8 on Amazon and I was able to just the cable portion and it work perfectly.

ATP Y-803 or ATP Y-804 It depends