Recent content by VPat

Welcome, lots of good people and information here.

PM sent

After new wheels and tires.

Maybe these will help.

Steel one if available. Let me know shipping cost to 19701.

I will take it if no one else has already spoken for it.

67-69 Plymouth Barracuda Carpet Automatic Passenger Area WITH Console Strips This is where I got mine. Fit very well with little trimming.

Well, I finally got the rear window bolt out yesterday after about 2 hours. I welded a 1/2 drive 7/16 socket on to 14 inches long of 1/4 inch flat bar. Loosened it 1/4 turn on each bite. Breaker bar would not work, not enough room. Everything cleaned up and lubed. Waiting for new window to...

Yes I have the service manual and it shows replacing the window with the trim panel removed. There are 2 holes to access the bolts easily with it rolled about 3/4 up. With rolled all the way down, I can access the forward bolt easily, but not the rear one. Can get a boxed offset wrench on it...

The piece I need to remove is the trim panel with the dome light in it. I assume that there are screws under the chrome strip and that is where I have a problem. It only has one screw at the end near the trunk. How is the rest held in and how do I remove it without damage. I am sure that is...

Anyone removed the garnish molding/trim panels on a 68 fastback? Looking for guidance/starting point.

Very nice looking Dart. Where in Iowa? That is the state I was hatched and raised in. Moville, east of Sioux City.

I thought the same thing. I did find in the service manual procedure to replace it, but requires removing the "garnish molding per the service manual and what I call the interior metal trim. Have to figure out the sequence for removing it with damaging it.

Last Saturday I had my 68 Barracuda fastback sitting in the driveway so I could do some cleaning in the garage. It was a hot sunny day and I had all the windows rolled up. After about 4 hours I heard a loud bang that sounded like a gun shot. Went out to the driveway and found the quarter...

I would go with Randy's. My shipping would be higher as I am further away.