What Cam is fo me?

Hello Mopar Guru's!!!!!

Recently I lost a lifter in my engine and (Joy!) also one of the lobes on my cam so I decided it was time for a complete rebuild. I am now at the point where I am looking for a replacement cam shaft and although I did like the cam that was in the car, I did not build that motor so I would like to hear other opinions from the people that Know.

My basic setup is as follows.

LA 318 .060 over
KB Pistons
Edelbrock 600 cfm performer carb and intake.
Hookers with dual pipes
2500 or 2800 stall (cant remember)
904 with shift kit
8 3/4 rear 3.70 Gearing
Not sure about compression

The cam I had was a Comp Cam 20-232-4, wasn't too severe so something a little more lumpy wouldn't be a problem and maybe something with a little more low/mid oomph!

http://www.compperformancegroupstor..._Code=CC&Product_Code=20-232-4&Category_Code=

I do not run the strip but my boots do get a little heavy some times #-o

Bobby.