ford 9" monarch

again some more info pulled straight from another site. hope it helps....


Ranger rear-end?

The Ranger rear end is a 7.5", also found in Bronco II , many are traction-locks, most had a 3.45, 3.73, or 4.10 ratio and parts are cheap because the same carrier came in mustangs etc. with V6s. These might be a good option.

The width is about 1/2" narrower than an A-body rearend and it's got the 4 1/2" bolt pattern. you will have to move the spring pearch's to the bottom of the axle housing. But this thing looks big and strong when you put it up next to a 7 1/4" mopar.