67 Dart Build Triangulated 4 link & Mini Tub

rapom65 said
Louis - I'm working with Ricky to get the 4 link kit put together. Do you remember what part number shock kit you ordered from summit? I was looking at them this morning but they have 10+ pages of combinations to choose from!

What specific reasons did you go with the 130# springs? Did you match the torsion bar spring rate, use some type of front/rear bias formula, or some other means?

Thanks for all your help and the willingness to share with others all your info. It sure makes it a lots easier when someone else has done the leg work of sorting out a project like this.

I called upon Crackedback, AKA Rob, he recommended the 130# springs and I fully trust his knowledge and opinion on the subject!

Here is what I bought. http://www.summitracing.com/parts/CMB-15-0058/

You WILL need to call strange and order the different ends for the shocks. They come with 1/2 " ball bearing type ends with c clips that hold them in. I posted what you need to use here:

FROM POST 250 in this thread.

The cost was I believe $42.00 delivered to my door for the end swap!

I got my Shocks yesterday and the ends are wrong, I called Strange and their customer service is awesome! They are sending me the correct Poly bushings and sleeves. The bottom of the shock needs 5/8 x 1 3/8's sleeves while the top needs 1/2" x 1 3/8 Sleeves. The shocks came with bearing type ends that would eventually wear out with street driving and would need to be replaced often. Summits description of the shocks said Eyelet - Eyelet , not bearing bearing. Anyway the Poly Bushings will work better.