1974 Duster

If you plan on using the factory flexplate be advised that the old school starter bendix strikes the tone wheel preventing the car from starting!

I think Chrysler moved the starter location on the A-500 and 42RH (overdrive 904 units) so the same flexplate could be used with the 518/46RE.

The mini-starter I have here will not fit with the 904, there is a section of the starter the strikes the block. There is a large "hole" at the rear near the oil pan rail, looks like 1/4 of the edge has to be removed.

The mini-starter does NOT have the large bendix like the old school starter does. I think I can grind off a section of the block and it just might work.

Otherwise you have to pull the motor out and have the tone wheel machined off.

What a pain..

Car is running, 65 psi of oil pressure! Who would have thought a .480 lift cam would have been so darn quiet?? I feel so outdated, it use to be when you had a .480 lift cam you knew it! SOB idles like a stocker.

I'm going to take a break for a few days, maybe on the road next weekend.

starters.jpg

illfixyourass.jpg

block.jpg

DSCN4136.jpg