Any AC Techs

System was fully flushed and the compressor was dissassembled and all new seals installed. Filled with PAG 100 double end capped oil. The condenser is new also.
I did not spray water on it. Being an 67 system there is no cycling switch, so it just runs till the evaporator freezes. All temps were with MAX ac setting.
When the gauge readings were at 40/225 the vent temps were at 75 degrees at idle. At that point I had only put in 12 ounces of r134. Put in another 12 ounces and that is where it's at now.