Hood Scoop Measurement

I made my own template. Basically I measured from the center of each stud to the center of every other stud (lots of numbers there) for evey stud on each scoop. I then drew it up on AutoCAD and printed it out. On the bottom of the hood bracing there are 4(yellow circles above) 1" diameter stud holes that I center punched and drilled out with a 1/8" bit. I then laid my template on the topside of the hood, using those 4(yellow circles above) holes as a locator, then marked and drilled the remaining 4 holes. Nerve wracking, but it worked!! Remember measure and re-measure for accuracy.

Good luck!