Cam specs

It'll run like a stock cam if not mello -er.


Cam lift: Int- .281 Exh-.296 .
This is the cams lift, on the cam, the amount of rise off the base circle
Valve Lift: Int-.422 Exh-.444 . actual intended valve lift in theroy

(.281 X 1.5 = .421.5 rounded off to 422)

Lobe CTR: Int-108 Exh-116
When the center of the lobe is at max lift, this is the degrees on the wheel where it should be at

Lash HOT: Int-HYD Exh-HYD
Lash is the amount of play the rocker arm has on top of the valve, being a Hyd. theres none.

SAE Duration: Int-278 Exh-288

This is called "Advertised duration"

SAE Timing
BTC 26
ABC 72
BBC 75
ATC 33
These are the timing events of the valves being open or closed in degrees according t the timing wheel/damper

.050 Duration: Int-204 Exh- 214 The industry standard amount of lift at a total rise of .050 in order to measure a cam of any type or maker. This is a level playing feild on which to judge

.050 Timing
BTC -6
ABC 30
BBC 43
ATC -9

these are the timing markls at the above description, .050 valve rise.