Best setup for 60'

Thanks for all of the input.

Car went 12.89 @ 105.11
Running through the traps at 5600 rpm.

If I can get the 60' down I think a 12.60 uncapped and leaned out a bit in the primaries is not unreasonable.
Seems a little fat but would be ok for the juice. but I have not sprayed it yet because I want to get it tuned on motor first.
I have a 125 plate kit on it.

Combo is...

0.30 over 360
9.50.1 pistons 116CP pistons. Compression might be a little better with the E heads.
Lunati .480 .480 280 cam
M1 dual plane intake.
Quick fuel 750 carb ( dont know the jet sizes have not had it apart yet. )
Eddy heads out of the box.
with HD stock type rockers. (I know I should get some comps I had them and had to try them )
Small tube headers. (dont know the brand but, they are el cheapo's. )
Through 2 1/4 mufflers (blowmaster knocks offs)dumped at the axle.
727 with the mancini 175k converter not much over a factory high stall.
Manual VB
4.10 SG
Shifting @6200 pulls hard all the way through breaks the tires loose pretty good on 1-2 shift.

I dont have the incrementals handy but, They are with the car in the trailer ( Im lazy and have not even unloaded it yet :) )