Any input on this carb?
Vtmopar, do you have the 4777 650 DP? If so, switching to the Proform or Holley main body for about $125 will make it a 750. Don't know anything about Dominators myself but i believe the 750 version has the same size venturis as the 1050 but has some big *** boosters to kill the flow.
Yes.
The 3310 was another I was thinking of.
I have a 570 street avenger I had on a midly built 350 SBC that worked well.
I tried it on my 360 and it did not work. Ran very lean. Stepped the jets but was not enough carb.
I do not know what I have for a cam or compression.
I will not know that until this winter when I get the motor out.
I have only had this car a few months.
My first Mopar,learning.
I know some about engines and I do know it is a very aggressive cam.
Very choppy Idle loves WOT.
has fairly high compression have to run high test.
Has chevy adjustable rockers and not sure if it still has the small valves in it or not.
The previous owner told me it had a 3500 stall converter. I do believe it but he bought the car as is,he did not build it.
Again I will know for sure when the motor is out and I can go through everything.
Its a very quick car. I am very curious to find out what cam it has and what has been done to the heads.
Plan on rebuilding the engine this winter.
Goals are somewhat streetable car that hopefully will run in the low 13's
then work towards getting into the 12's eventually.
Somone used the car at some point as a track car,the rear fenders have been rolled to accomadate wider tires.
Pleased with the car,light and fun.
Thanks for the input and replys.