I had to cut the drivers side motor mounting tab to clear the exhaust. Some guys run the Exhaust under the K FRAME when using the block hugger headers. I figure the front end is more than likely going to see some air so I decided to run them on top of the K Frame.
Since I will be making my own Solid Motor mounts I will take care of doing a gusset on the back side somewhere when the mock up motor is back out.
I will be reworking this area here when the motor is back out. I will move the motor mount up about 1.5-2" when I end up making them and I will also reinforce this area with some type of gussets etc