**Twin Turbo 67 Dart Project**

Next I will be cutting in the Wastegate Piping and routing the exhaust out from the gates to the exhaust side out of the turbo's.

After that my next task is mounting the Air/Water Intercoolers in each fender well and the heat exchanger up in front of the radiator. It has 2 10" Fans and I will set them to push air thru the heat exchanger which will go thru the radiator also. The 16" Electric Radiator fan will PULL the air which should work very well. With this set up I am not too worried about the normal issues of an upfront mounted Air to Air intercooler has. Whatever Warm air that is left after the Air/Water system should be taken out with the METH Injection system.

The intercooler piping also showed up today! I ordered BLACK Couplers so I will be ditching the blue. My scheme is Black AN fittings, stainless lines and black couplers.

With the fans set up where you see them in the picture below works perfect. I do not need to modify the core support or any brackets. The Hood lock bracing fits right in between the fans Like it has been waiting for it! I checked it out today.

The heat exchanger is only 1" Thick!

View attachment IMG_2177.jpg

View attachment IMG_2178.jpg

View attachment IMG_2069.jpg

View attachment IMG_2176.jpg