Anybody running 17" Cobra Bullit rims on a Duster

Hotlines, My wheels are 6.29 backspace ( 45mm offset ) or about .0007941919 furlongs :)

The easiest way to tell < 05 vs 05+ is the valve stem. If the valve stem is on the painted part of the wheel, it's 05+ and if the stem is partly in the brushed lip, it's < 05. Also, the spokes on the 05+ wheels are a little more "round" and don't have as much of a sharp line down the center of each spoke.

They'll fit all right, with the correct spacers. Spacers are not for everyone, I live about 6 miles from work and my car only sees about a 10-12 hwy trips per year ( not much more than 20 miles per trip ) so spacers aren't a huge concern, although I do check them every couple of months to make sure they're tight. Spacers are a hugely debated topic on the site so I'm not gonna get too far into it, but if a full size furd truck can use them to run semi rims...then the 17's on my car should be fine...