how to install headers?

Jack the car up as high as you can get it (minimum of 18") and block it up securely. Pop the dist. cap loose and move it out of the way of the wiper motor so you can jack the engine up as far as possible then block the engine up so it don't fall on you. You have to remove the steering center link cause it routes through the drivers side header. Take the oil filter off and if your car has a 90* oil filter adapter you will probably have to take it off too so get new gaskets for it. Take the starter off. Take the engine to trans. braces off. It can be done without taking the torsion bars out but it does help a lot if you take them out. Make sure you have a torsion bar removal tool as they are nearly impossible to get out without one. Do the drivers side header first cause it's tighter but leave it kinda loose until you get the pass. side header in place. Hope you ain't got power steering cause that makes a bad job even worse.