OK, I need suggestions from Scattershield owners!

Before you go to crazy, here's something to measure if your current set up works well.

Get the clutch removed and measure distance from flywheel face to clutch fork bracket. Install the scattershield and make sure that distance is the same. I've had scattershielsds need as much as 3/8" spacers to get the distance correct and the clutch worked like junk when it was wrong. No pedal, engage right off floor because the fork was over angled.

Just something to watch out for while doing the job.

Yeah, getting the throwout in and keeping it on your fork is a trick. Use some all thread sticking out from the bell to help align your trans during install.