having a little issue...

1wild&crazyguy said
shattered the rings...
must have been some real good detonation going on.

You should run the cam specs, cylinder psi [when new w/cam] and calculated static comp by me/us one more time.

you say you're running what gear and convertor?

ok erson solid flat, 282/282ADV 246/246 @ .050, 340 lobe x 1.35 rockers =.459 valve - .015 lash

3.5 bore, 3.5 bore head gasket (.036 compressed) 45cc chambers, .170 in the hole 9.2 comp

cyl pressure was 145psi

building rear with 8.75/3.91's but have 7.25 w/ 2.94 25" tire

2K stall converter, looking at 3200 stall