**Twin Turbo 67 Dart Project**

I need to cut in the BOV's. As mentioned before I am using 2 50mm valves. I tested them on the bench and they open at 10lbs of Vacuum so when the throttle slams shut they should pop right off! The camshaft will be a SOLID ROLLER with around 230ish @50 and .600 Lift or so. I am hoping it will have plenty of vacuum. If not I can still adjust them.

I also have an Idea................... On the M1 the carb pad is high and MACHINABLE!! Soooo I will probably just switch to the M1 and have Brian Machine about 1 inch off the Pad so I can use the EXTREME VELOCITY Carb Hat and call it GOOD!!:cheers:

I have a 1/2" spacer under the Carb during the Mock up and the reason for that is I want to have enough room for a NITROUS PLATE..........ohhhhhhh yeah!! haaaaaaaaaa

View attachment IMG_2347.jpg

View attachment IMG_2348.jpg

View attachment IMG_2349.jpg