What is a good combo for turning high rpm?

I am just going to throw my opinion in here....I have seen 7500 numerous times with a 318.

I didnt see a windage tray in your engine specs...or a HV oil pump.

In your situation, I would decrease the cam duration to the 220-230 @ .50 range....around 262* advertised..over 300* is not good for sustained high RPM.....your cams lift is adequate.

At 100% VE a 318 requires 630 cfm, but for your higher rpm desires

I would get a race prepped Holley 750 MS....

For your high rpm pulls where you want to not have to shift.....I agree with another person who replied....decrease your final drive ratio.... 3/4 less of a rotation in your driveshaft will give you longer gear duration.

I understand the acceleration from slow speeds is less snappy, but everything is a sacrifice or trade off.

Can you reduce any more weight or is it race spec already?



:read2: