**Twin Turbo 67 Dart Project**

Some more parts showed up today.

I am using 4 7" Fans that are 1100CFM Each and draw 3 amps. So 4400 CFM of air pulling or pushing, however you want to do it. I plugged one of them in today to see how it feels and it kicks some serious air. It just about jumped out of my hand when it started up. 1 Bosch Relay will take car of all 4 Fans triggered by a temp sensor in the manifold. I had to do it this way for clearance reasons. The water pump pully smacked the other single fan that I had in there.

The 2 10" Fans on the Heat Exchanger will push air and I will be setting the 4 7" Fans to Pull air thru the Radiator so in all there will be 6900 CFM of air moving thru the radiator. Another Bosch Relay will be wired in to control the 2 10" fans and the pump which will be wired together and come on at the same time. I may wire them to a push button lighted switch...........

View attachment IMG_2504.jpg

View attachment IMG_2505.jpg

View attachment IMG_2503.jpg

View attachment IMG_2506.jpg

This is the water pump for the air/water circulation.

View attachment IMG_2507.jpg

I am using 3 ball valves to re route the water thru the closed loop ice box that will be mounted in the trunk.
They sent me the wrong fittings for the male end so I need to go to ACE Hardware and pick some up. Shipping them back will be
too expensive since they only cost 3 bucks each.

View attachment IMG_2508.jpg