The 70 Duster......

When I went up in September to check on the project, I took some better pictures of the axles. I still plan to order new ones once the project gets closer to completion even though several people have said that is pretty much what all small bolt pattern axles look like after re-drilling to 4 1/2 inch bolt pattern.

As for patience...I have somewhat "back burnered" the project in preperation for a possible move in July 2011. Plus I have been gathering parts for a 71 Charger project and messing with my 71 Dart a little. The Dart just will not idle smooth to save its life. We have been through the carb several times and nothing changes. Changed the carb out and tried a couple of other carbs..no luck. Changed the points to a Pertronix Electronic system which helped a little. Then we checked the intake to see if it was leaking, and it does not appear to be. We checked for leaks around the carb flange and could not find a leak. So we took it to a shop that supports the local Mopar club and spent $263 for them to tell me I should order an EFI system. LOL So I trailered the car back to our shop and it sits until I can get back up there and try something else or find someone that really wants to mess with it. At least I got it out of the shop and got it rinsed off!! First time it has seen daylight since 2007. It was DUSTY!!