my slant wont turn over!

First, the converter bolts only line up in one postition, here's the alignment marks:



I would pull the converter to flex plate bolt back out, and see if you can turn the engine with a wrench. If not, align as per the picture---you may need to use a lamp and mirror to see the flex plate mark, then see if the starter will crank it. I would not try this without at least two, preferably three bolts in. Even if they're not tight, get two or three threaded in

Also, have you pulled the plugs? See if you can see anything in the cylinders, and leave the plugs out until you get it to turn over.