1973 360 Rebuild

To do it right;

* clean and magnaflux the block to check for cracks and sonic check the cylinders for adequate wall thickness.
* measure the block to determine what machining is necessary. Bore, deck, line hone the mains, etc.
* machine as necessary and install new cam bearings
* clean and magnaflux the crank to check for cracks
* measure the the bearing surfaces and machine as necessary.
* clean and check rods for cracks
* resize and install new high strength bolts
* measure and weigh all pistons.
* balance the rotating assembly
* clean and magnaflux heads to check for cracks
* machine as necessary

Assuming you are going to assemble the engine your self you are done with the machine shop.