Project: "A Body Jr" - 1975 Dodge Colt

Demon1515, you are on track.
I am going 2x4 rectangular steel. It is running front to back, replacing the existing subframes. I am going to try to keep the front cross member as it houses the lower control arm and ball joints. The stock strut setup is not bad, but I may just jump straight to a coil over in the front. The upper mount will go from frame behind the radiator support, up to upper mount of coil over and down, to frame by side wall. I am going to keep it as short as possible, to allow as much space as possible around the 383...the wheel wells will be hand formed and removeable for easy access.