Buyig a 4spd trans

If it is the factory trans out of the car it will be an e-body trans. You can use a e-body trans in an a-body. The forward mount has to be ground down to clear the torsion bar crossmember, the you get or make a shifter mounting bracket that will put the shifter in the a-body location. This bracket bolts to the rear shifter boss. You will also have to shorten your driveline if you use a b/e body trans unless you are running a 727 then it will be the same length.

I saw a post with pictures some were, I will try and find it or at least someone here will find it.

Chuck