School me!
I know this may be annoying, but could you list the parts needed to place a belt driven procharger or centrifugal system on my 383. I have found a pretty decent deal on a procharger with 1500 miles off a 5.0 mustang. It s cureently an 8lb boost pulley but he has the 10lb and 12lb with it. also what is needed with the fuel system. I am sorry but I am just not that confident I know enough and may be forgetting some items.
Here's a list as complete as I can make it, but I am sure I will likely leave something out. Here we go...
Centrifugal supergharger of some kind
Mounting plate
Crank pulley for blower
Idler pulley and mount for the pulley
Plumbing for the supercharger's output to either the intercooler, or to the carb, if you decide not to run an intercooler
Plumbing from the intercooler to the carb hat or enclosure
Re-curved distributor
MSD B0ostmaster if street driven; not needed if just for the strip
Some sort of alky/water injector to help lower the necessary octane
Supercharger belt
Boost gauge
Entire new fuel system, with a boost-referenced fuel pump and pressure regulator, minimum 1/2" hose and fittings
Appropriate exhaust system (2 1/2" is good; 3" is better
Carb "hat," or carb enclosure
I have heard that single-plane intakes work better that 180-degree designs, although my Air-Gap Chinese ripoff seems to work okay on my 360.
Turbocharging is very similar, but different, in detail.
Hope this helps!