Best 273 and 318 builds (NO 360's please)

hey new here. here is my 318 build
71'318 block bored .030
older forged 318 crank 10/10
KB167 pistons .003 in the hole
318 reszed floating rods
fully ported 302 heads with 1.88/1.60 valves w/61cc chambers
lunati 230@50 .480@50 BM2 cam
weild action plus dual plane intake
650VS holley
comp push rods
mopar 509 springs with damper
9.73to1 comp
i did not really want that cam but i got a 318 that was built and never ran cause it somehow got water in cylinder and frose and busted it. it had the whole rotating assmy cam,intake headers and ARP bolts top to bottom in it and got it for 180 bucks. never even turned over,cam still had assmy grease all over it.

i had a fresh block that been machined and a set of 302 heads i ported to put on it so i figured i could not go wrong. but i might change the cam later
so what do yall think about it?