The Other 68 Dart Resto Project
OK, I had a dilemma, there were a couple of tiny pinholes in the rear 1/4's, but nothing else, the inner trunk panels and drain holes were great, but I am still worried about what I cant see. I have used Evapo-rust with great success, so why not flood the inner fenders with it and get rid of the rust you cant see.
So, here is my plan and execution.
Step one, the parts, RIO-400 fish tank pump, 4 feet of hose, 5 gallon bucket, and a rubbermaid trash can lid.
I used the lid with a hole cut in it to catch the dripping.
Here is the hose, routed through the filler hole.
Here we go, pissing fluids, flushing out the rust.
I had a little bit of splashing, so I devised an expensive sheild to keep it to a minimum.
OK, I had a dilemma, there were a couple of tiny pinholes in the rear 1/4's, but nothing else, the inner trunk panels and drain holes were great, but I am still worried about what I cant see. I have used Evapo-rust with great success, so why not flood the inner fenders with it and get rid of the rust you cant see.
So, here is my plan and execution.
Step one, the parts, RIO-400 fish tank pump, 4 feet of hose, 5 gallon bucket, and a rubbermaid trash can lid.
I used the lid with a hole cut in it to catch the dripping.
Here is the hose, routed through the filler hole.
Here we go, pissing fluids, flushing out the rust.
I had a little bit of splashing, so I devised an expensive sheild to keep it to a minimum.
