Hedman Shorty Headers?

Hi all, I'm Mopargirl's husband with the 67 Cuda. I originally tried to install Headman long tube headers but after installing the left side I had to remove the header and beat the 2nd tube with a hammer so it would clear the steering column. (it even says this in the instructions beleive it or not). When I pulled it back out (which is no easy task) that's when I decided shorties were the way to go. The tech at the muffler shop was reluctant to install the connection but did any way. It seems to have worked out pretty well. As far as performance, I don't race the car but is seems to pick up and go better than when I had the old long tube headers in. Of course this is probably because one of the tubes on the drivers side was almost completely closed from hitting something in the road. I didn't do it I bought it that way. The exhaust the muffler shop put in hangs about as low as the long tubes did (maybe a smidge lower) but I had them raise the torsion bars about 3/4 of an inch for better clearance. I hope this helps anyone in need.

Cudasrule (lucky to be Mopargirls husband)