7................ has power in the on postion and not cranking, to solve this mopar ran a wire from the starter relay that has power when cranking for the ignition, its a seperate wire then the one running to the starter, but it is also brown
You used the "crank" or "start" wire feeding to the start relay to act as an ignition bypass?
You CAN NOT DO THIS unless you put a series diode in the wire leading to the ignition. That's because the ignition -- when running -- will backfeed to the starter relay
It should not be that difficult to trace down the original wire---don't you still have the factory connector coming off the ign switch, in the steering column?