Need help finding one particular wire...

66plyValiant said
ignition 2 power comes from the source I meationed, not the wire that supplys power when the key is in start position for starter, there is a dedicated wire for it, sorry if there was a misunderstanding not trying to seem like an assh*^&

No, wasn't accusing you, just trying to clear it up. Sounded like you were pulling off the starter relay.

Hopefully to clear this up there are actually THREE sources for start/ crank/ ignition:

1 Wire supplying power to starter relay with key in "start."

2 SEPARATE contacts in the switch, separate wire (brown usually) supplying power to ignition with key in "start."

3 "Ignition run" with "key on" normally dark blue