360 Won't Start!!

take the #1 plug out take a rage and push in the hole to close the hole bump the starter until you hear the motor kick the rage out and then stop look at your crank see where your marks are and if it before tdc turn it with your hand or what ever you need to turn it with to tdc then remove the dizzy cap and make sure your pointing towards #1 with the rotor...you my be off a little...if your not pointing in the right dir. youll have to pull the dizzy up and get it set in the right spot..i m sure someone has apic of what im talking about with the dizzy pointing the right way..hope this helps out mike