360 Won't Start!!

sounds like you might be 180 out on the distributer........make sure the rotor is pointing at #1 on the cap on the compression stroke......take #1 spark plug out, stick your finger in the hole, and bump it over until compression pushes your finger, chk. the line on the dampner and align it to zero on the scale. pull the dist. cap and see where the rotor is pointing. if its not pointing at #1 spark plug wire on the cap, pull the dist. back out and align it to #1. .............double chk. your firing order 18436572.......clockwise the rotor turns. let us know if that helps....
higgs