Just a 284-484?

The post before this is my a real world combination with the .484 cam.

If I where to fully port my heads and run a 2.02 set of valves what do you think it would be worth for horse power?????

I would only need 60 more horse or so to be near the numbers of the posted engine combination.

I think 30 more cfm in head flow is possible with porting.No????
30 cfm adds up to 60 horse when tuned in.

I don't run fully ported heads or even a 2.02 valve and i am pushing a 3700 pound car into the twelves.

I believe it's a strong 375 to 400 horse cam with a stockish engine for sure.

A good set of heads will make any cam work better then expected.

A big do or die for any engine is also knowing how to build the carb to the motor.

I think the biggest thing that is being over looked here is the amount of torque the cam makes and where it starts and stops in the power band.

This is one of the best torque cams mopar ever made for a high performance stock engine with stock parts.