head casting number 4772576?

Moper,
The bowls are 2.540 deep on the intake side, and the intake valve sits up in the chamber .140 and the exh. .100. Most valves are flush in the chamber and this is where the small cc's comes from. These heads only come bare and with buying the mopar performance valves, which are made by Ferrea for mopar we had about $1,100.00 total in them. The valves are $17.00 each for the int. and the exh. ($272.00) the heads cost $275.00 ea. ($550.00 when we bought them 4 years ago), springs, retainers, and locks were another $150.00 for a total of $975.00 plus tax. So now you would have about $350.00 more due to higher cost of parts, and most of this is in the price of the heads. As the valves, retainers, and locks are still about the same price as then. The bowls are a good bit deeper than the eddys which allows for more potential. And by useing Ferrea valves you now have high quality valves that are 1 piece stainless steel, not welded tips and heads like alot of others. I'll have to get Rumblefish to post the other pics. that I took today of the bowls and the chambers.