head casting number 4772576?
Moper, ya missed this;
They were under these P# P4529269, and P5249768, and now they are under one # P5007950 and list for $510.00 ea. bare, they also have 46 in Detroit.
I just happen to be on the phone with BJR now, so I'm beating him to the post.
I was half way through a reply to this when he called. It was going to read something like this;
The heads BJR has sent to me to post are a better deal even though theres a slight cost increase, due to valve gear parts, but it is a new durable iron head set up for your engine and cam specs for what your doing as verse the Edelbrocks set up which may not meet the needs of the cam in the engine or actually, your current set up, dependent.
If your running Edelbrock heads now and change out the cam, your still going to need new valve spring and gear (Assuming your going for more performance than the Edelbrock spring rates have or new cam requires) And if your pushing it with a roller or stout solid, new valves and such.
Though the Edelbrock is a good deal over a dead stock head, a good look around at other heads from everyone can reveal a interesting find. Of course, budget and goal dependent.
I'm not knocking the Edel. head at all. I have no problem recomending them. However (Again - goannnnn) everything is budget and goal dependent.
