Adjustable rocker pushrods

Thanks for the words of encouragement moper, sometimes that's all you need to hear. I've done the carpenter thing, measure three times, cut once, and am quite sure my measurements are accurate. I did talk with an engine shop yesterday and he said he almost always comes up shorter on the push rod measurement than the books call for. My engine was bought used, same with the rockers, so who knows. The shop did help me track down a set of Isky push rods listed for small block mopar with adjustable valve train at a 7.265 length. That is the shortest length I have found and should work just fine since my measurement was taken with a good three threads showing on the adjuster. Thanks again from a newbie! :salute: