W2 Stroker sale.
OK. I likely will sell my present engine. What would you fellas pay for this if you were in the market. Here's a short rundown;
Block: Is a '73 casting with .030" Weisco pistons. Lifter bores are bushed
Heads: W2 econo with pocket port.
Crank: A MP cast 4" stroke with SIR I beam rods.
Intake: MP M1
Cam: Is a Scott Brown solid with .565/.578 lift.
Rockers: Harland Sharp.
Balancer: ATI
Distributor: MSD Billet
Carb: Demon 750
Pan: Milodon
This thing has little running time with about 23 passes.
I'm likely going to have the new mill up and running this summer.
OK. I likely will sell my present engine. What would you fellas pay for this if you were in the market. Here's a short rundown;
Block: Is a '73 casting with .030" Weisco pistons. Lifter bores are bushed
Heads: W2 econo with pocket port.
Crank: A MP cast 4" stroke with SIR I beam rods.
Intake: MP M1
Cam: Is a Scott Brown solid with .565/.578 lift.
Rockers: Harland Sharp.
Balancer: ATI
Distributor: MSD Billet
Carb: Demon 750
Pan: Milodon
This thing has little running time with about 23 passes.
I'm likely going to have the new mill up and running this summer.