Ok you can't use a slant 904 to a Hemi it just won't work you have to use a small block 904 which you need to remove the left side dowel & replace it with a nut & bolt. The starter will be in the lower position...You will need to cut the corner of the ear sticking out the left side of the motor to get the starter in. Don't use an adaptor plate as you will then have to mod your trans mount as the adaptor pushes everything back by 12mm..."1/2". I have a mate with a VH Ute that has done exactly what you want to do I will try to get some pic's tomorrow.