Ok I've had a good nite at work not a whole lot going on (electrician in a steel mill)so I've been trying to answer my own question heres what I came up with
BOOST REFERENCE LOCATION
FUEL REG either in the carb hat position doesn't matter or about 5" from the intake of the carb hat I still think I read somewhere there is a ideal location but I couldn't find that thread
BOV should be referenced below the carb,my question is can I tap a fitting in my intake manifold off of one of the runners /6 Clifford four barrel intake there is a spot on the number six runner that would expect a nipple or Should I find a different location
WASTEGATE being that I hooked up my internal wastegate the boost reference will come off the turbo housing
MSD BTM should be boost referenced off a separate port off the carb hat
BOOST CONTROLLER ill probably T off of the wastegate unless that's not a good choice?
Does this sound right please give me some feedback if I have it wrong
Thanks FABO
Aaron