Problems Sealing Edelbrock Intake

Great thread

Have an airgap intake and noticed anti freeze in the valley, was thinking maybe the threads on the bolts didn't get sealant when installed. Then got to thin king that I have a problem with it smoking when it idles much and now I'm thinking the problem might be the intake gaskets.

So going to change the water pump (another story) and while it is down go ahead and change the intake gaskets and seal the threads in intake bolts

I know I could look it up, but sounds like we have several here that can answer my question without having to look it up. The front and rear intake bolts are the ones needing sealant? or are there others that go into the water jacket on iron J heads?