2 Tachs, Cam & Lifters, Wrist Pins, Pushrods
Selling off a few things that I no longer need.
Autogage tach. About 3" in diameter, 8k RPM, about 12"s of wire off the back, chrome exterior. $35 shipped.
Sunpro tach. About 2 5/8" in diameter, 8k RPM, only about 2"s of wire off the back, chrome trim ring. $25 shipped. (sale pending)
SB small summit cam. Hyd, used with 14 brand new lifters, you will need to buy 2. This is a nice upgrade in smogger 318/360's. Also have 340 valve springs that will work with this cam for $10 extra, super cheap upgrade. $65 shipped.
Pushrods, i believe they are mantons. Ball and cup, 3/8 diameter, right at 9.500 overall length. Came with a solid roller cam. They are used, show some witness marks where they rubbed on a block or head but not grooved. One or two show a little heat but not charred to a crisp. $90 shipped.
PM me on the board for best results!
Selling off a few things that I no longer need.
Autogage tach. About 3" in diameter, 8k RPM, about 12"s of wire off the back, chrome exterior. $35 shipped.
Sunpro tach. About 2 5/8" in diameter, 8k RPM, only about 2"s of wire off the back, chrome trim ring. $25 shipped. (sale pending)
SB small summit cam. Hyd, used with 14 brand new lifters, you will need to buy 2. This is a nice upgrade in smogger 318/360's. Also have 340 valve springs that will work with this cam for $10 extra, super cheap upgrade. $65 shipped.
Pushrods, i believe they are mantons. Ball and cup, 3/8 diameter, right at 9.500 overall length. Came with a solid roller cam. They are used, show some witness marks where they rubbed on a block or head but not grooved. One or two show a little heat but not charred to a crisp. $90 shipped.
PM me on the board for best results!