Interested in big block swap into 67 cuda

Camper motor from what I have seen had better rods and better cooling to the heads, otherwise not a bad motor to have. I still have one I am building. Now for the swap, you need to have new motors mounts which you can get from Schumacher Creative Services for $160. You will have to cut a small area out by the driverside motor mount area of your K-frame for oil pump clearance. You will need oil pan #699 or #187 for idler arm clearance. Thats it for installing the motor. You will have to make sure you have the right cooling system for the big block. Plus you will need to have at least an 8 1/4 rear. 8 3/4 would be a better choice. Now for brakes, that depends on the person doing it. Drum brakes can work if you have 10" drums up front, but I would up grade to a disc if you can. Some people will tell you to make you own K-frame. To me it is alot easier to just buy the motors mounts and spent more time working on the car in other areas.