Out with the 340 & in with the 410 stroker!

Mad Dart said

Justin, are the new rockers 1-6's also? How much spring pressure do you think they can handle? The Solid Roller in my new motor has the springs set up at 525 Lbs Open at 600 lift. The cam specs are right at 624 lift using 1.6's minus the geometry lift loss so right at 600 net lift.

Also where did you get them at and how much were they? No adjusters come with them right?

Click to expand...

Adv rating of 750 psi on the roller/s and 60,000 on the body.
They're 1.5
They come with adjusters, not sure I trust them though, thats based on advice from dan dvorak.
I bought harland sharp adjusters for $90 from mancini racing [already had'em], induction hardened shafts from rocker specialties $110 pair[already had'em] , the rockers themselves were $124.
and hey...if they wear out in few yrs, I just buy another set and reuse the shafts/adjusters
heres a set for sale.
http://cgi.ebay.com/ebaymotors/Chry...Accessories&hash=item588e4199d8#ht_2269wt_762

and jegs sells them too

http://www.jegs.com/i/Procomp Electronics/746/2311/10002/-1?CT=999