FS: Twin Hood Scoop Templates for 70-71 Dart/Demon

340 wedge 1971,
If you look at the hood bracing, you will see that their is a arch cut out in it. This is the location for large air hole. Also if it did go back any father it would be right in the middle of the bracing for the hood and weaken the hood. Hope this helps.
TAZZ
Click on the finish drilling 2 section to see picture.

[ame="http://www.flickr.com/photos/tazldazl/5258362698/sizes/m/in/set-72157625591197740/"]All sizes | Finished drilling 2 | Flickr - Photo Sharing!@@AMEPARAM@@http://farm6.static.flickr.com/5241/5258362698_0485139427_m.jpg@@AMEPARAM@@5258362698@@AMEPARAM@@0485139427[/ame]