im going to be installing a 416 in my 74 dodge dart and was wondering if the hooker super comp 13/4 would work since i have a manual box because their only listed 1970 to 1972 thanks guys
Will they fit?............Yes. Will they fit without some tweaking?.......No. For one, if you run a factory front sway bar, the sway bar mounting bracket blocks the opening in the k member that the #1 header tube on the super comps must go through. If the car is going to be for the strip, just yank the sway bar and you're good to go. If it's going to be a street car, you'll need to relocate the sway bar mounting brackets to allow the header tube to go through the k member opening. Secondly, there can be some interference with some types of oil pans such as the Milodon, and this will require some hammer work to the tube that is hitting the pan. Third, though not necessary, would be to install a mini-starter which would make future work in that area much easier. Good luck with your project.