TheMattMobile
74 Dart Swinger
Got a 440 in a 73 duster. Want to run the mopar performance valve covers but they don't fit under the blower motor. Was wondering if anybody knew of an aftermarket one that was smaller?
heater blower motor
- Thread starter TheMattMobile
- Start date
-
Burntorange70
Well-Known Member
Longgone did a good thread on that here. http://www.forabodiesonly.com/mopar/showthread.php?t=73748
Here's a thread with a solution for you :glasses2:
http://www.forabodiesonly.com/mopar/showthread.php?t=73748
http://www.forabodiesonly.com/mopar/showthread.php?t=73748
TheMattMobile
74 Dart Swinger
Thanks guys. I had seen that thread on big block dart but the pictures here are a nice touch.
Burntorange70
Well-Known Member
If you don't want to do that or it will not work for you, I know ones out of Neons are small. Should be able to find them at a junk yard. Not hard to take out either. Go under the dash and take out three bolts and it comes ight out.
Don't know if it will work or not and will take some moding to do. Just a thought.
Don't know if it will work or not and will take some moding to do. Just a thought.
TheMattMobile
74 Dart Swinger
Greatly appreciate the help. We decided we just are going to go without a heater seeing as its always harsher and only driven in nice weather lol
76orangewagon
Well-Known Member
In case you change your mind....heres the solution I came up with. Summit Racing sells there own brand but it's identical to the Flex lite unit.
Much smaller than factory and nothing enters the engine compartment. It's only 9"x9"x6" and uses 5/8" heater hoses for heat for those nights that windows get steamed over
-
