I bought the car 3 years ago from owners widow , she did'nt know a lot about eng except it was a stock bore 360 with 13,2,1 pistons. the head are J heads polished and ported cooper shim gskts, large shaft and roller 1.6 rocker arms cam is a flat tappet. i don't know lift or dur. eng is clearanced and balanced hi volumn oil pump, m1 single plain manifold and 750 proform. msd complete ignition sys. 6al box Biano delay box. I have a 150 wet shot on eng I 've never used it . trans is a 904 built good. 8 inch 5500 stall conv. kevlar clutch packs cheata reverse manuial v/body and c02 opperated shifter.co2 throttle inhanser,all I do is stere this beast.488 8/3/4 rear with springs moved in and SS springs, & snubber , shocks are 50/50 on rear. I have a rpm air gap it ran about the same times but not as consistant as m1. that phone # is my cel Gary:happy7: