can anyone share some quarter panel install photos ?

Thanks for the mention Scott!

the link to my build thread is located below in my signature.

I did half quarter patch installs with AMD panels so the majority of the panel's except on the bottom (wheel well's and trunk extention's) I ended up butt welding into place.

if you need any tips or advice feel free to send me a PM and I will try to answer your questions.

I have not got mine painted yet but I have got the metal work on my duster pretty much done.

and a good tip that was previously mentioned which I also did on mine was after grinding down your weld to use duraglass ....the fiberglass strands will help add a bit more strength at your weld seam. then grind it down and come back over it with a skim coat of filler.

there is alot of tricks to know when installing panels and without knowing you might find your self in a bit of a situation.