Changes done and ready for the track.

JoeDust451 said

I'll say 12.4-12.6 @ 107-108 if you can leave good & jam the gears, good luck & have fun!!

You must have spun alot only trapping 102 with that cam, Thats a very good cam & pulls hard, Well tuned it should pull 109-110 with that set-up, You may want to consider glass bumpers/hood, my 75 dusters F&R bumpers & braces weighed 165 lbs., hood weighed around 63 lbs., after that those 75 dusters are VERY light.

Click to expand...

I did spin plenty prior if I launched anything above say 2000 RPM, but this is my new setup which I've never run at the track. Prior I had factory heads w/mild bowl work and XE274 hydraulic cam w/cheap headers. Thinking the changes added 75+ HP. Certainly lost some low RPM torque, but by running slicks I should be able to launch at 3500 plus rpm's to be up in the power band yet still hook it up. I can't wait, should be a rush !(also hoping not to test out my winch LOL) Getting down in the 12's much less mid 12's would be so sweet!